License Conditions Software Print2CAD

Back2CAD AI Technologies, LLC
601 Cleveland St, Suite 310
Clearwater, FL 33755 USA

§1 Responsibility and Liability

Please be informed that Back2CAD AI Technologies LLC provide PDF, DWG, DXF, HPGL, Raster Image, DWF conversion technology with Print2CAD™ Software for personal use only, not for copyrighted materials you are not the owner of. Back2CAD AI Technologies LLC waive any responsibility for possible copyright infringements.

§2 Primary Obligations

The Print2CAD™ Software may be activated and used on one computer only. It may not be activated on multiple computers (excluded Network Floating Licenses or Hardlock Versions) used by different people simultaneously.

End Licensees agree not to alter, reverse engineer or disassemble the Software Application. End Licensees will not copy the Licensed Software except:
(i) as necessary to read the Software Application from the media into the memory of a computer solely for the purpose of executing it on a single machine (whether a stand-alone computer or a workstation component of a multi-terminal system), or
(ii) to create an archival copy. End Licensees agree that any such copies of the Software Application shall contain the same proprietary notices which appear on, and in the Software Application.
End Licensees may not install, access or otherwise copy or use the Software Application except as expressly authorized by this Agreement.

End Licensees may not distribute, rent, loan, lease, sell, sublicense, or otherwise transfer all or any portion of the Software Application, or any rights granted in this Agreement, to any other person without the prior written consent of Licensee.

End Licensees may not install or access, or allow the installation or access of, the Software Application over the Internet for the purposes of making the Software Application available to third parties, including, without limitation, use in connection with a Web hosting or similar services.

End Licensees may not modify, translate, adapt, arrange, or create derivative works based on the Software Application for any purpose.

End Licensee may not utilize any equipment, device, software, or other means designed to circumvent or remove any form of copy protection used by Licensee or its licensors in connection with the Software Application, or use the Software Application together with any, authorization code, serial number, or other copy protection device not supplied by Licensee or its licensors.

End Licensees may not use or export the Software Application outside of the country of purchase for any reason.

End Licensees acknowledge that the Software Application is the confidential information of Licensee and its suppliers, and End Licensees agree that under no circumstances may End Licensees disclose the Software Application to any third party.

Title to and ownership of the intellectual property rights associated with the Software Application and any copies remain with Back2CAD AI Technologies, LLC USA and its suppliers.

In no event shall Licensee or its suppliers be liable in any way for indirect, special or consequential damages of any nature, including without limitation, lost business profits, or liability or injury to third persons, whether foreseeable or not, regardless of whether Licensee or its suppliers have been advised of the possibility of such damages.

You are not entitled to loan, rent, nor to use it as the basis for software programs of your own.

Back2CAD AI Technologies, LLC USA expressly forbids the use of CADirect™ Software in applications or systems in which, as far as it is possible to judge, malfunctions of this software can be expected to cause physical damage or injury resulting in death. You may only use the program in an environment of this kind at your own risk. Back2CAD AI Technologies, LLC USA shall not assume any liability whatsoever for damages or losses due to such prohibited use.

A guarantee shall only be granted for faults claimed within six (6) months of the purchase of CADirect™ license. Obvious defects in the software must be specified within four (4) weeks of their discovery. If the software is defective, Back2CAD AI Technologies, LLC USA shall be entitled, at its own decision, to either supply a replacement or return the purchase money.

You are strongly advised to test new software thoroughly in an uncritical environment before putting it to actual use. You shall bear the entire risk of being able to use the program for your intended purpose.

The District Court of Clearwater, Florida USA shall have exclusive jurisdiction over any and all disputes arising from or related to this contract. Only substantive US law shall be applicable to this contract.

The Print2CAD™ Software may not be made available to third parties who have connections to a data conversion service provider, an applications service provider or similar company; nor may it be used in a company for the purpose of offering services to third parties in the area of data conversion.

The rights granted to you by this license shall not imply that any rights are granted to third parties.

Software older than 3 years is not supported and can't be updated to the new version.

§3 Software End of Service (EOS) and Software End of Life (EOL)

Software older than 3 years (three years after purchase) is no longer supported (EOS) and also can't be updated to the new version.

End of Life (EOL) of a Software begins 5 years after the purchase (2 years after the End of Service).

Visit the following page to find more info: Software End of Service (EOS) and End of Life (EOL)

&4 Subscriptions

For subscription-based licenses, cancellations must be submitted at least one month prior to the subscription’s end date to prevent automatic renewal.

Discount codes used during the initial purchase of a subscription are valid only for the first year and cannot be applied to renewals or subsequent subscription periods.

Subscribers benefit from a free upgrade to the latest version of the software as it becomes available and enjoy full support services throughout the duration of their active subscription.

§5 Copyrights

DWG is the native and proprietary file format for AutoCAD® and a trademark of Autodesk, Inc.

"Print2CAD" is Trademark of Back2CAD AI Technologies, LLC, USA

"CADirect" is Trademark of Back2CAD AI Technologies, LLC, USA

\“Back2CAD” is Trademark of Back2CAD AI Technologies, LLC, USA

"Kazmierczak" is Registered Trademark of Kazmierczak Software GmbH, Germany

"DeepView" is Registered Trademark of Kazmierczak Software GmbH, Germany

© Copyright 2024 Back2CAD AI Technologies LLC. All rights reserved. Kazmierczak® is a registered trademark of Kazmierczak Software GmbH. Print2CAD, CADirect, CAD.bot, CAD Bot, Elaine, Elaine Bot, Elaine Android, Android CAD Support are Trademarks of Back2CAD AI Technologies LLC, Florida, USA. CADGPT (pending registration #97846047), LAWGPT (pending registration #97848423), TakeAI (pending registration) are trademarks of Expert Robotics LLC, Florida, USA. ACADGPT is trademark of Expert Robotics LLC, Florida, USA. DWG is the name of Autodesk’s proprietary file format and technology used in AutoCAD® software and related products. Autodesk, the Autodesk logo, AutoCAD, AutoSketch, DWG are registered trademarks or trademarks of Autodesk, Inc. IntelliCAD is a trademark of IntelliCAD consortium (ITC). OpenAI and ChatGTP are a Trademarks of OpenAI Foundation. All other brand names, product names, or trademarks belong to their respective holders. This website is independent of Autodesk, Inc., and is not authorized by, endorsed by, sponsored by, affiliated with, or otherwise approved by Autodesk, Inc. The material and software have been placed on this Internet site under the authority of the copyright owner for the sole purpose of viewing of the materials by users of this site. According to the stipulations, it is imperative to note that the priority codes are mutually exclusive. The utilization of multiple codes concurrently is strictly prohibited, regardless of any potential leniency within the ordering system.